Rf Transceiver Ics combine the transmit and receive paths for a wireless link in one device, often with the RF front end, modem, synthesizer and control logic on a single chip. The category spans sub-GHz parts for metering and industrial telemetry, 2.4 GHz devices for Bluetooth Low Energy, Zigbee, Thread and proprietary links, plus wideband and multi-band parts used in gateways, asset trackers, remote controls, toys, medical sensors and building automation. Some are transceiver-only chips that need an external MCU; others are wireless SoCs with a Cortex-M core, memory and stack support, so the line between RF IC and microcontroller is not always clean. Buyers usually start with frequency band and regional rules, then look at output power, receiver sensitivity, data rate, modulation, supply range, sleep current, package size and antenna interface. After that come the less glamorous details: regulator or certification status, stack maturity, reference design quality, tools, EVB availability, lifecycle status and whether the part is on allocation. A common trade-off is price versus confidence. Saving a few cents from a loose channel can look good until reels arrive with mixed date codes, dry-pack handling is unclear, or a QFN lot will not pass incoming inspection. Many teams prefer tape-and-reel with full traceability and will pay a little more to keep production calm. If you have a target part number, alternates list or annual usage, check current stock and request a quote at icxing.com.
Ask for traceability to the franchised source or original lot, plus photos of labels, reels and date codes before payment. For QFN and BGA packages, confirm MSL handling and inspect solderability on receipt; RF parts are small, and remarked lots are common during shortages.
Match the regulatory band first, then compare sensitivity, output power, adjacent-channel performance, sleep and receive current, package and stack or driver support. A part with better paper specs can still be the wrong choice if the reference design, certifications or toolchain are weak.
Yes, but pin-compatible swaps are rare once the radio, MCU and software stack are considered. Provide the exact part number, firmware dependencies, band, certification needs and annual volume so alternates are checked for real drop-in risk rather than just similar headline specs.
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
|
Analog Devices, Inc. | IC RF TXRX WIFI 48... |
3,610
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX ISM<1GH... |
2,810
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX ISM<1GH... |
6,950
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX+MCU IS... |
3,840
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX+MCU IS... |
7,100
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | 2.4GHZ TO 2.5GHZ, 802.... |
2,380
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX WIFI 48... |
6,870
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX ISM<1GH... |
4,280
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX ISM<1GH... |
2,290
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | 2.4GHZ TO 2.5GHZ, 802.... |
3,740
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX WIFI 56... |
3,000
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | 2X2 RADIO TRANSCE... |
6,940
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX 300-6000MH... |
3,920
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | 2X2 RADIO TRANSCE... |
4,800
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | IC RF TXRX CELLUL... |
5,680
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | MADURA FULL FR |
4,880
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | MADURA BROAD MAR... |
4,620
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | MADURA BROAD MAR... |
7,450
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | 4T4R DIRECT RF REC... |
1,420
In-stock
|
Inquiry | ||
|
Analog Devices, Inc. | ADF7030 - SUB GHZ IS... |
2,880
In-stock
|
Inquiry |