RF Transceiver ICs

RF Transceiver ICs

Rf Transceiver Ics combine the transmit and receive paths for a wireless link in one device, often with the RF front end, modem, synthesizer and control logic on a single chip. The category spans sub-GHz parts for metering and industrial telemetry, 2.4 GHz devices for Bluetooth Low Energy, Zigbee, Thread and proprietary links, plus wideband and multi-band parts used in gateways, asset trackers, remote controls, toys, medical sensors and building automation. Some are transceiver-only chips that need an external MCU; others are wireless SoCs with a Cortex-M core, memory and stack support, so the line between RF IC and microcontroller is not always clean. Buyers usually start with frequency band and regional rules, then look at output power, receiver sensitivity, data rate, modulation, supply range, sleep current, package size and antenna interface. After that come the less glamorous details: regulator or certification status, stack maturity, reference design quality, tools, EVB availability, lifecycle status and whether the part is on allocation. A common trade-off is price versus confidence. Saving a few cents from a loose channel can look good until reels arrive with mixed date codes, dry-pack handling is unclear, or a QFN lot will not pass incoming inspection. Many teams prefer tape-and-reel with full traceability and will pay a little more to keep production calm. If you have a target part number, alternates list or annual usage, check current stock and request a quote at icxing.com.

Frequently Asked Questions

How do I avoid counterfeit RF transceiver ICs when the factory part is short?

Ask for traceability to the franchised source or original lot, plus photos of labels, reels and date codes before payment. For QFN and BGA packages, confirm MSL handling and inspect solderability on receipt; RF parts are small, and remarked lots are common during shortages.

What specs matter most when comparing two transceivers for the same band?

Match the regulatory band first, then compare sensitivity, output power, adjacent-channel performance, sleep and receive current, package and stack or driver support. A part with better paper specs can still be the wrong choice if the reference design, certifications or toolchain are weak.

Can you suggest alternates if my exact RF transceiver is end of life?

Yes, but pin-compatible swaps are rare once the radio, MCU and software stack are considered. Provide the exact part number, firmware dependencies, band, certification needs and annual volume so alternates are checked for real drop-in risk rather than just similar headline specs.

Mounting Type:
138 Records
Image Part Manufacturer Description Stock Action
BCM43602KMLG Broadcom
IC RF TXRX WIFI S...
6,190
In-stock
Inquiry
BCM43460KMLG Broadcom
IC RF TXRX WIFI S...
1,300
In-stock
Inquiry
BCM43217TKMLGT Broadcom
ULTIMATE LOWCOST...
2,500
In-stock
Inquiry
BCM43236BKML1G Broadcom
WLAN SINGLE CHIP...
2,510
In-stock
Inquiry
BCM43235KMLG Broadcom
WLAN SINGLE CHIP...
5,010
In-stock
Inquiry
BCM43238BKMLG Broadcom
WLAN SINGLE CHIP...
4,810
In-stock
Inquiry
BCM43236TBKML1WG Broadcom
WLAN SINGLE CHIP...
7,570
In-stock
Inquiry
BCM89830A0BWMLG Broadcom
SINGLE-PORT AUTO...
6,650
In-stock
Inquiry
BCM43455XKUBG Broadcom
1X1 11AC BTFM COMBO
5,330
In-stock
Inquiry
BCM89832A0BWMLG Broadcom
100BASE-T1 PHY
7,690
In-stock
Inquiry
BCM89836A0BFBG Broadcom
100BASE-T1 PHY
5,570
In-stock
Inquiry
BCM89834A0BFBG Broadcom
100BASE-T1 PHY
6,450
In-stock
Inquiry
BCM43238TBKMLWG Broadcom
WLAN SINGLE CHIP...
5,710
In-stock
Inquiry
BCM43569YKAKRFBHT Broadcom
DUAL BAND MIMO (I...
4,630
In-stock
Inquiry
BCM4356XKUBG Broadcom
DB MIMO,EPA,BT4.1,F...
3,090
In-stock
Inquiry
BCM4358X3KWBG Broadcom
DUAL BAND MIMO:(I...
2,480
In-stock
Inquiry
BCM43236BKML1GT Broadcom
WLAN SINGLE CHIP...
4,170
In-stock
Inquiry
BCM43236TB1KML1WGT Broadcom
WLAN SINGLE CHIP...
5,900
In-stock
Inquiry
BCM43566PKFFBG0 Broadcom
11AC DUAL-BAND 2X2 ...
6,060
In-stock
Inquiry
BCM43570KFFBGT Broadcom
DUAL BAND 2X2 (IPA...
3,910
In-stock
Inquiry