Rf Transceiver Ics combine the transmit and receive paths for a wireless link in one device, often with the RF front end, modem, synthesizer and control logic on a single chip. The category spans sub-GHz parts for metering and industrial telemetry, 2.4 GHz devices for Bluetooth Low Energy, Zigbee, Thread and proprietary links, plus wideband and multi-band parts used in gateways, asset trackers, remote controls, toys, medical sensors and building automation. Some are transceiver-only chips that need an external MCU; others are wireless SoCs with a Cortex-M core, memory and stack support, so the line between RF IC and microcontroller is not always clean. Buyers usually start with frequency band and regional rules, then look at output power, receiver sensitivity, data rate, modulation, supply range, sleep current, package size and antenna interface. After that come the less glamorous details: regulator or certification status, stack maturity, reference design quality, tools, EVB availability, lifecycle status and whether the part is on allocation. A common trade-off is price versus confidence. Saving a few cents from a loose channel can look good until reels arrive with mixed date codes, dry-pack handling is unclear, or a QFN lot will not pass incoming inspection. Many teams prefer tape-and-reel with full traceability and will pay a little more to keep production calm. If you have a target part number, alternates list or annual usage, check current stock and request a quote at icxing.com.
Ask for traceability to the franchised source or original lot, plus photos of labels, reels and date codes before payment. For QFN and BGA packages, confirm MSL handling and inspect solderability on receipt; RF parts are small, and remarked lots are common during shortages.
Match the regulatory band first, then compare sensitivity, output power, adjacent-channel performance, sleep and receive current, package and stack or driver support. A part with better paper specs can still be the wrong choice if the reference design, certifications or toolchain are weak.
Yes, but pin-compatible swaps are rare once the radio, MCU and software stack are considered. Provide the exact part number, firmware dependencies, band, certification needs and annual volume so alternates are checked for real drop-in risk rather than just similar headline specs.
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
|
Infineon Technologies | IC RF MM-WAVE-MMI... |
1,820
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
2,390
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
1,780
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
4,960
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
4,540
In-stock
|
Inquiry | ||
|
Infineon Technologies | 8-BIT FLASH MCU, 80... |
2,780
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU WI... |
3,500
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
3,200
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU WI... |
2,770
In-stock
|
Inquiry | ||
|
Infineon Technologies | BLUETOOTH, BLE AN... |
3,630
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
7,480
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
3,380
In-stock
|
Inquiry | ||
|
Infineon Technologies | SINGLE-CHIP BLUE... |
7,920
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX ISM>1GH... |
5,560
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
5,450
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
3,800
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU IS... |
3,940
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
4,400
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
6,090
In-stock
|
Inquiry | ||
|
Infineon Technologies | IC RF TXRX+MCU BL... |
4,630
In-stock
|
Inquiry |