Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

157,794 Records
Image Part Manufacturer Description Stock Action
CA33EP20-16PB62 ITT Cannon
84A204748P2 G.E.
7,550
In-stock
Inquiry
CA33EP20-19PB ITT Cannon
CB 3C 3#8 PIN RECP B...
4,950
In-stock
Inquiry
CAB120010-77 ITT Cannon
CA3102E14S-2SBF80A232F...
1,100
In-stock
Inquiry
CACOM08-32E/B-W/CC ITT Cannon
CANCACOM08-32E/B-W/...
3,650
In-stock
Inquiry
CACOM08-36E/B-SHIELD ITT Cannon
CANCACOM08-36E/B-SH...
6,970
In-stock
Inquiry
CACOM08-36E/B-W/CC ITT Cannon
CACOM08-36E/B-W/CC
1,900
In-stock
Inquiry
CACOPM08-28E/B-W/CC ITT Cannon
CACOPM08-28E/B-W/CC
1,600
In-stock
Inquiry
CAG06E20-4SB15 ITT Cannon
CAG06E20-4SB15 HADIM...
1,290
In-stock
Inquiry
CAG06E24-10PB15 ITT Cannon
CAG06E24-10PB15 HADI...
7,670
In-stock
Inquiry
CAG06E24-10SB15 ITT Cannon
CAG06E24-10SB15 HADI...
5,480
In-stock
Inquiry
CAQ06COME18-11SB ITT Cannon
CA-BAYONET
3,400
In-stock
Inquiry
CAR030NP32-22SBF80-60 ITT Cannon
CANCAR030NP32-22SBF...
6,560
In-stock
Inquiry
CAR0EP10SL-3SBF80 ITT Cannon
CAR0EP10SL-3SBF80
7,600
In-stock
Inquiry
CAR0EP24-10SBF80 ITT Cannon
CA-CAR
3,350
In-stock
Inquiry
CAR0EP28-51SBF80 ITT Cannon
CAR0EP28-51SBF80
6,930
In-stock
Inquiry
CAR0EP40A38SBF80F42 ITT Cannon
CAR0EP40A38SBF80F42
2,630
In-stock
Inquiry
CAR0F20-4SB62 ITT Cannon
CAR0F20-4SB62
5,350
In-stock
Inquiry
CAR0FP14S-6PB62 ITT Cannon
CAR 6C 6#16S PIN REC...
3,850
In-stock
Inquiry
CAR0FP20-4SB62 ITT Cannon
CAR 4C 4#12 SKT RECP...
2,220
In-stock
Inquiry
CAR0FP32-76SBF80-9 ITT Cannon
CANCAR0FP32-76SBF80...
5,570
In-stock
Inquiry