RF Accessories
RF accessories cover the supporting hardware that sits around amplifiers, antennas, transceivers, and test gear rather than the headline components themselves. On this page you will usually find coaxial connectors, adapters, terminations, attenuators, couplers, cable assemblies, bias tees, surge protectors, and small mechanical parts such as bulkhead fittings or panel mounts. These items look minor on a schematic, but they decide whether a link holds impedance, stays sealed, and survives handling in the field. Most buyers come here with a shortlist keyed to frequency range, interface type, VSWR, power rating, and insertion loss, then check plating, body material, ingress protection, and whether the connector is standard SMA, N-type, BNC, TNC, or something less common like SMP or 2.92 mm. In procurement, the trade-off is familiar: a name-brand connector may cost several times more than a generic equivalent, yet the cheaper option can introduce mismatch, intermittent contact, or early wear after repeated mating cycles. Counterfeit and re-marked parts are also a real concern in this category, especially for high-frequency adapters and precision terminations where small mechanical drift ruins performance. Lead time matters too, because cable assemblies and weatherproofed parts are often built to order, while common adapters are normally easier to pull from open-market stock. Buyers usually compare approved-vendor parts against equivalent alternatives, then decide based on test margins, certification needs, and how quickly they can get full reels, cut pieces, or a mixed carton for maintenance. For production work, packaging and lot traceability often matter as much as unit price, particularly when parts are going into outdoor radios, aerospace boxes, medical gear, or cellular infrastructure. If you already have part numbers or a target specification, you can check current stock and request a quote at icxing.com.
Frequently Asked Questions
How do I know whether an RF connector or adapter is genuine?
Ask for traceable lot information, clear photos of markings and plating, and supplier history if the part is not coming from an authorized channel. For higher-frequency parts, also compare dimensions and finish closely, because poor copies often show up first in thread fit, center contact alignment, or inconsistent labeling.
What specs matter most when sourcing RF accessories?
Start with frequency range, impedance, interface type, VSWR or return loss, insertion loss, and power handling. After that, check material, plating, mating cycles, temperature range, and ingress protection if the part will be used outdoors or in a harsh cabinet.
Why do prices vary so much for similar RF parts?
A lot of the cost is in precision machining, plating quality, test control, and brand traceability rather than the raw metal itself. Lead time can move the price too, because a common SMA adapter from open stock is usually much easier to source than a ruggedized 2.92 mm part or a custom cable assembly.
- Manufacturer:
-
- TDK Corporation (4)
- 3M (1)
- Aaronia AG (35)
- Abracon (2)
- Acconeer AB (4)
- Adafruit (3)
- Advantech (6)
- Airgain (1)
- Alive Telecom (2)
- Amphenol (8)
- Bourns, Inc. (12)
- Browan (2)
- Bulgin (1)
- Cambium (17)
- Ceragon (1)
- CITEL INC (12)
- CommScope (2)
- D6 Labs (1)
- Digi (99)
- Digilent, Inc. (1)
- Digiwave (14)
- Embedded Artists (2)
- EnOcean (1)
- FEIG ELECTRONIC (3)
- Galtronics (1)
- Harwin (2)
- Helium (1)
- Hirose (8)
- Huber+Suhner (230)
- ifm Efector (2)
- ILLUMRA (8)
- JC Antenna (1)
- Kerlink (2)
- KYOCERA AVX (4)
- Laird Connectivity (20)
- Linx Technologies (23)
- LM Technologies (2)
- Melexis (1)
- Microsemi (16)
- Mini-Circuits (3)
- Motorola (48)
- Narda-MITEQ (465)
- Netvox (10)
- NI (2)
- NimbeLink (2)
- Omron Automation (52)
- onsemi (1)
- OptConnect (1)
- Parallax, Inc. (3)
- PCTEL (34)
- Phoenix Contact (34)
- Pi Supply (1)
- Pulse Electronics (137)
- Qualcomm (4)
- Radiall USA, Inc. (17)
- RAKwireless (3)
- Red Lion (1)
- RF Solutions (10)
- Rosenberger (21)
- Sanoxy (13)
- Seeed (2)
- Siemens (10)
- Sierra Wireless (18)
- Silicon Labs (2)
- Siretta (5)
- SparkFun (6)
- Sprague Goodman (17)
- Synapse Wireless (12)
- Tallysman Wireless (20)
- Taoglas (11)
- TE Connectivity Laird (1268)
- Telegärtner (16)
- Turmode (2)
- Twin Industries (4)
- u-blox (1)
- VEC Supply (9)
- VolleyBoast (1)
- WAGO (3)
- Weidmuller (25)
- Xaptum (1)
- Accessory Type:
-
- For Use With/Related Products:
-
- Filter:
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
|
KYOCERA AVX | CONN SHIELD LOCK... |
21,221
In-stock
|
Inquiry | ||
|
Sierra Wireless | WP SNAP IN SOCKET... |
2,793
In-stock
|
Inquiry | ||
|
Sierra Wireless | AC ADAPTER 12VDC |
120
In-stock
|
Inquiry | ||
|
SparkFun | XBEE EXPLORER DO... |
380
In-stock
|
Inquiry | ||
|
Times Microwave Systems | GROUND KIT FOR LM... |
214
In-stock
|
Inquiry | ||
|
TE Connectivity Laird | MOUNTING BRACKET... |
828
In-stock
|
Inquiry | ||
|
Taoglas | CBL ASSY SMAF TO ... |
149
In-stock
|
Inquiry | ||
|
TE Connectivity Laird | LIGHTENING SURGE... |
260
In-stock
|
Inquiry | ||
|
TE Connectivity Laird | SURGE PROTECTOR ... |
1,360
In-stock
|
Inquiry | ||
|
TE Connectivity Laird | LIGHTNING ARREST... |
126
In-stock
|
Inquiry | ||
|
Qualcomm | CONVERTER USB TO... |
35
In-stock
|
Inquiry | ||
|
NI | NI PS-15 POWER SUP... |
101
In-stock
|
Inquiry | ||
|
Maestro Wireless Solutions (Lantronix) | STRIP ANTENNA |
399
In-stock
|
Inquiry | ||
|
Linx Technologies | COVER FOR OEM TX ... |
244
In-stock
|
Inquiry | ||
|
Pulse Electronics | RAIN CAP FOR NMO ... |
429
In-stock
|
Inquiry | ||
|
TE Connectivity Laird | MOUNT L BRACKET F... |
341
In-stock
|
Inquiry | ||
|
Tallysman Wireless | ALUMINUM GROUND ... |
353
In-stock
|
Inquiry | ||
|
Pulse Electronics | NMO HIGH FREQUEN... |
113
In-stock
|
Inquiry | ||
|
Linx Technologies | BASE MAGN 50MM 13.1'... |
947
In-stock
|
Inquiry | ||
|
Multi-Tech Systems, Inc. | POWER CABLE DC |
375
In-stock
|
Inquiry |
