Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

157,794 Records
Image Part Manufacturer Description Stock Action
249-8619-017 ITT Cannon
APD-1AP37
3,910
In-stock
Inquiry
192900-0427 ITT Cannon
TRI N PLUG F 0-48 NO...
3,980
In-stock
Inquiry
192900-0430 ITT Cannon
TRI N PLUG F 0-48 NO...
7,200
In-stock
Inquiry
192993-0054 ITT Cannon
CONN PLG HSG FMAL...
2,070
In-stock
Inquiry
192900-0561 ITT Cannon
TRI N PLUG M PLAS...
1,360
In-stock
Inquiry
192900-0562 ITT Cannon
CONN PLG HSG FMAL...
6,010
In-stock
Inquiry
192900-0558 ITT Cannon
CONN PLG HSG FMAL...
1,040
In-stock
Inquiry
192900-0582 ITT Cannon
TRI N RECP M FLG 2...
7,170
In-stock
Inquiry
192900-0508 ITT Cannon
TRI N RECP F J/N 2-...
2,430
In-stock
Inquiry
TN6S16-0213P1L ITT Cannon
CONN PLG HSG MALE...
5,770
In-stock
Inquiry
192900-0057 ITT Cannon
CONN PLG HSG FMAL...
3,790
In-stock
Inquiry
TN0S16-0213S1L ITT Cannon
CONN RCPT HSG FMA...
3,240
In-stock
Inquiry
192900-0353 ITT Cannon
CONN RCPT HSNG MA...
1,830
In-stock
Inquiry
192900-0014 ITT Cannon
CONN PLG HSG MALE...
3,240
In-stock
Inquiry
192900-0539 ITT Cannon
CONN PLUG HSG MAL...
6,800
In-stock
Inquiry
192900-0015 ITT Cannon
CONN PLG HSG MALE...
4,890
In-stock
Inquiry
192900-0055 ITT Cannon
CONN PLG HSG FMAL...
5,530
In-stock
Inquiry
192900-0030 ITT Cannon
CONN RCPT HSG FMA...
4,370
In-stock
Inquiry
192900-0056 ITT Cannon
CONN PLG HSG FMAL...
5,180
In-stock
Inquiry
TN0S24-1219S1L ITT Cannon
CONN RCPT HSG FMA...
6,450
In-stock
Inquiry