Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

157,794 Records
Image Part Manufacturer Description Stock Action
KJB6T19M32PAL ITT Cannon
CONN PLUG HSG MAL...
4,770
In-stock
Inquiry
FRCIR01-20-4S-F80-VO ITT Cannon
CONN RCPT HSG FMA...
5,950
In-stock
Inquiry
CA3101E24-7PBF80F0 ITT Cannon
CB 16C 2#12 14#16 PIN R...
5,340
In-stock
Inquiry
CA3108F28-21SBF80F0 ITT Cannon
CONN PLG HSG FMAL...
5,390
In-stock
Inquiry
KPSE06F16-26SA206F0 ITT Cannon
CONN PLG HSG FMAL...
5,430
In-stock
Inquiry
KPSE06F16-26SF0A206 ITT Cannon
KPSE 26C 26#20 SKT PL...
1,140
In-stock
Inquiry
CIR06AF-18-1S-F80-VO ITT Cannon
CIR 10C 10#16 FR SKT ...
5,670
In-stock
Inquiry
CA3106E18-10SBF80F0A232 ITT Cannon
CB 4C 4#12 SKT PLUG
3,740
In-stock
Inquiry
CA3106E24-10SWBF80F0 ITT Cannon
CANCA3106E24-10SWBF8...
3,360
In-stock
Inquiry
CIR030FP-18-10P-F80-T108-VO ITT Cannon
CIR 4C 4#12 PIN RECP...
4,700
In-stock
Inquiry
KJB7T17W8SAL ITT Cannon
KJB 8C 8#16 SKT J/N R...
1,230
In-stock
Inquiry
FRCIR01F-16S-8S-F80-T108-VO ITT Cannon
CIR 5C 5#16S FR SKT ...
7,230
In-stock
Inquiry
CA06EW18-12SBF80F0A232 ITT Cannon
CONN PLUG HSG FMA...
4,730
In-stock
Inquiry
CA3101R24-11PF0 ITT Cannon
CONN RCPT HSNG MA...
6,120
In-stock
Inquiry
CA3106R28-22SF0 ITT Cannon
CONN PLUG HSG FMA...
7,540
In-stock
Inquiry
CIR06R-20-22S-F80-T89-VO ITT Cannon
CONN PLUG HSNG FM...
4,940
In-stock
Inquiry
CA3106E12S-3SBF80F0 ITT Cannon
CB 2C 2#16S SKT PLUG
2,810
In-stock
Inquiry
KPSE06P18-11PF0 ITT Cannon
MS3126P18-11PF0
2,020
In-stock
Inquiry
CA3100E18-12SBF85F80F0A232 ITT Cannon
CB 6C 6#16 SKT RECP ...
4,430
In-stock
Inquiry
CA3102E12S-3PBF80F0-05 ITT Cannon
CB 2C 2#16S PIN RECP...
5,140
In-stock
Inquiry