Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

Image Part Manufacturer Description Stock Action
65823-043LF Amphenol Communications Solutions
CONN HEADER R/A 50...
4,840
In-stock
Inquiry
10066744-050 Amphenol Communications Solutions
CONN HEADER VERT...
6,490
In-stock
Inquiry
78280-460LF Amphenol Communications Solutions
CONN HEADER VERT...
1,840
In-stock
Inquiry
53611-S50-4LF Amphenol Communications Solutions
CONN HEADER VERT...
2,430
In-stock
Inquiry
66429-242LF Amphenol Communications Solutions
CONN HEADER R/A 50...
7,910
In-stock
Inquiry
64991-G32-4LF Amphenol Communications Solutions
CONN HEADER VERT...
4,350
In-stock
Inquiry
10119110-572003LF Amphenol Communications Solutions
CONN HEADER R/A 72...
5,000
In-stock
Inquiry
66429-240LF Amphenol Communications Solutions
CONN HEADER R/A
1,990
In-stock
Inquiry
10140949-103LF Amphenol Communications Solutions
VERIO BC COMBOPI...
5,560
In-stock
Inquiry
10127830-101LF Amphenol Communications Solutions
VS2 4X16 VH SM G+ 2W
7,810
In-stock
Inquiry
53611-S50-8 Amphenol Communications Solutions
CONN HEADER SMD 5...
2,630
In-stock
Inquiry
75160-161-36LF Amphenol Communications Solutions
CONN HEADER VERT...
6,030
In-stock
Inquiry
10080054-217LF Amphenol Communications Solutions
CONN HEADER VERT...
5,170
In-stock
Inquiry
66429-242 Amphenol Communications Solutions
CONN HEADER R/A 50...
7,880
In-stock
Inquiry
67273-036LF Amphenol Communications Solutions
CONN HEADER VERT
4,640
In-stock
Inquiry
65823-083LF Amphenol Communications Solutions
CONN HEADER R/A 34...
6,860
In-stock
Inquiry
69155-160 Amphenol Communications Solutions
CONN HEADER R/A 60...
6,690
In-stock
Inquiry
66429-452LF Amphenol Communications Solutions
CONN HEADER R/A 50...
6,900
In-stock
Inquiry
66207-140 Amphenol Communications Solutions
CONN HEADER VERT...
5,560
In-stock
Inquiry
65823-045LF Amphenol Communications Solutions
CONN HEADER R/A 50...
2,170
In-stock
Inquiry