Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

135,496 Records
Image Part Manufacturer Description Stock Action
53309-2870 Molex
0.8 BTB WAFERASSY ...
1,780
In-stock
Inquiry
54167-0508 Molex
0.50MM PITCH SLIMS...
4,690
In-stock
Inquiry
53309-3670 Molex
0.8 BTB WAFERASSY ...
3,110
In-stock
Inquiry
52602-0679 Molex
1.00MM PITCH RECEP...
6,110
In-stock
Inquiry
53929-0878 Molex
0.5BTB PLGOVERMOL...
2,460
In-stock
Inquiry
52974-0604 Molex
05 BTB REC HSG ASS...
4,850
In-stock
Inquiry
71661-2568 Molex
.050 EBBI 50D PLUG R...
1,900
In-stock
Inquiry
54363-0778 Molex
0.50MM PITCH SLIMS...
7,960
In-stock
Inquiry
53481-1068 Molex
0.635 BTB ST PLG HSG...
5,080
In-stock
Inquiry
53353-2871 Molex
0.8 BTB WAFER ASSY...
7,520
In-stock
Inquiry
55201-0278-C Molex
0.5 BTB PLG ASSY 20C...
6,240
In-stock
Inquiry
54684-0704 Molex
SLIMSTACK BOARD-...
5,150
In-stock
Inquiry
52465-4070 Molex
SLIMSTACK BOARD-...
4,740
In-stock
Inquiry
52584-0679 Molex
1.00MM PITCH RECEP...
6,810
In-stock
Inquiry
171446-0115 Molex
SPEEDSTACK.PLUG ...
7,460
In-stock
Inquiry
71742-2001 Molex
1.00MM MEZZ (IEEE 13...
1,860
In-stock
Inquiry
71439-2864 Molex
MEZZANINE 1MM BTB...
6,960
In-stock
Inquiry
71436-2064 Molex
MEZZANINE 1MM BTB...
7,200
In-stock
Inquiry
53627-1474 Molex
0.635 BTB PLG HSG AS...
7,600
In-stock
Inquiry
53649-0874 Molex
0.635 BTB ST PLG HSG...
1,430
In-stock
Inquiry