Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

135,496 Records
Image Part Manufacturer Description Stock Action
501189-4011 Molex
1.0 W/B 2-ROW REC HS...
7,450
In-stock
Inquiry
43640-0700 Molex
MICROFIT 3.0 INLIN...
6,980
In-stock
Inquiry
51089-1405 Molex
14CKT 2MM D/R HOUSI...
4,570
In-stock
Inquiry
505606-0800 Molex
CP 3.3 W/W CONN DLR...
7,910
In-stock
Inquiry
505596-0601 Molex
MUO 2.5 W/W DUAL RO...
3,830
In-stock
Inquiry
172258-1010 Molex
ULTRA-FIT RCPT HS...
1,430
In-stock
Inquiry
46528-0001 Molex
2.50MM PITCH SPOX B...
1,690
In-stock
Inquiry
501189-4030 Molex
1.0 WTB 2-ROW REC HS...
3,150
In-stock
Inquiry
10-63-3064 Molex
5/7.5MM KK SPOX HOU...
2,700
In-stock
Inquiry
502380-0601 Molex
1.25 W/B SINGLE PLG...
3,070
In-stock
Inquiry
43061-0018 Molex
156 KK SPOX RCPT HS...
6,220
In-stock
Inquiry
200488-0002 Molex
MINIFIT TPA 2.0 SR...
6,910
In-stock
Inquiry
93444-1209 Molex
93444-1209
7,890
In-stock
Inquiry
46625-0300 Molex
MICROFIT3.0 BMI SR...
3,730
In-stock
Inquiry
501189-3014 Molex
1.0 WB 2ROW REC HSG...
7,980
In-stock
Inquiry
501189-3012 Molex
1.0 WB 2ROW REC HSG...
6,730
In-stock
Inquiry
51035-1300 Molex
2.5 B/IN CONN. HSG
1,690
In-stock
Inquiry
78196-1001 Molex
DLP LAMP REC HSG ...
1,270
In-stock
Inquiry
505432-3001 Molex
1.25 ROBUST W/B DUA...
7,280
In-stock
Inquiry
51035-1100 Molex
2.5 B/IN CONN. HSG
3,600
In-stock
Inquiry