Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

135,496 Records
Image Part Manufacturer Description Stock Action
200453-0005 Molex
MINIFIT TPA 2.0 SR...
3,900
In-stock
Inquiry
34824-0162 Molex
MINI50 CONN RCPT 1...
2,420
In-stock
Inquiry
51110-2850 Molex
2MM MGRID WTB REC...
6,390
In-stock
Inquiry
98786-1019 Molex
MOX RCPT HSG 0.635 C...
2,710
In-stock
Inquiry
503658-1400 Molex
2.0W/B SINGLE REC H...
7,360
In-stock
Inquiry
43640-1101 Molex
MICROFIT 3.0 SR PL...
6,690
In-stock
Inquiry
43025-1202 Molex
MICROFIT 3.0 DR RC...
3,380
In-stock
Inquiry
504186-2800 Molex
1.25 W/B DUAL REC HS...
2,840
In-stock
Inquiry
93444-1201 Molex
2CCT ML-XT RECEP B...
3,040
In-stock
Inquiry
93444-1106 Molex
93444-1106
5,690
In-stock
Inquiry
51089-1805 Molex
18CKT 2MM D/R HOUSI...
4,350
In-stock
Inquiry
43020-1210 Molex
MICROFIT 3.0 PLUG ...
3,690
In-stock
Inquiry
09-50-8153 Molex
KK 156 CRIMP HOUSI...
4,410
In-stock
Inquiry
34899-3031 Molex
12MM SLD ASSY BLD ...
2,970
In-stock
Inquiry
34899-3011 Molex
1.2MM SLD ASSY BLD...
7,630
In-stock
Inquiry
200453-0006 Molex
MINIFIT TPA 2.0 SR...
7,250
In-stock
Inquiry
200471-0006 Molex
MINI-FIT TPA 2.0 PL...
5,380
In-stock
Inquiry
51242-3002 Molex
2.0 WTB DUAL CONN R...
4,140
In-stock
Inquiry
09-50-7151 Molex
156 KK TERM HSG O/R...
3,580
In-stock
Inquiry
26-03-4141 Molex
KK 156 CRIMP HOUSI...
4,480
In-stock
Inquiry