Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

135,496 Records
Image Part Manufacturer Description Stock Action
505606-1000 Molex
CP 3.3 W/W CONN DLR...
4,840
In-stock
Inquiry
505605-1000 Molex
CP 3.3 W/W CONN DLR...
4,740
In-stock
Inquiry
502380-1500 Molex
1.25 W/B SINGLE PLG...
1,180
In-stock
Inquiry
51163-0900 Molex
2.5 W/B REC HSG
4,670
In-stock
Inquiry
98821-1068 Molex
NSCC HYB RCPT HSG...
4,810
In-stock
Inquiry
160027-0008 Molex
AK50 HYBRID RCPT 2...
1,810
In-stock
Inquiry
50-57-9510 Molex
SL CRP HSG H SR 10...
1,930
In-stock
Inquiry
22-01-2107 Molex
100 KK TERM HSG W/L...
3,230
In-stock
Inquiry
45626-0001 Molex
SPOX BMI PLUG HOU...
2,370
In-stock
Inquiry
15-24-4048 Molex
4CKT RECEPTACLE H...
1,160
In-stock
Inquiry
91813-9109 Molex
CRIMP TERMINAL H...
4,680
In-stock
Inquiry
50-57-9211 Molex
SL CRP HSG C SR FR...
4,930
In-stock
Inquiry
90143-0106 Molex
CGRID MODR CRP HS...
2,620
In-stock
Inquiry
03-12-1046 Molex
125 HCS 125 POWER RC...
4,300
In-stock
Inquiry
172762-0008 Molex
MINIFIT TPA 2.0 DR...
5,660
In-stock
Inquiry
09-50-7141 Molex
156 KK TERM HSG O/R...
7,390
In-stock
Inquiry
90143-0110 Molex
CGRID MODR CRP HS...
5,000
In-stock
Inquiry
93445-2201 Molex
3CCT PLUG BLACK W...
1,830
In-stock
Inquiry
200488-0004 Molex
MINIFIT TPA 2.0 SR...
7,160
In-stock
Inquiry
22-01-3157 Molex
100 KK TERM HSG W/L...
1,290
In-stock
Inquiry