Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Sensors, Transducers

Sensors and transducers cover a huge slice of the component market, and honestly the category page can feel overwhelming until you know what you are looking for. On the low end you have simple devices like float level switches and basic IR receiver modules. Move up and you are dealing with industrial encoders, current transducers, gas sensors for CO2 or VOC monitoring, humidity and moisture sensors for HVAC and process control, plus pressure, force and flow sensors built for factory automation. The accessories and amplifier sub-categories exist because half the battle is signal conditioning and mounting hardware that actually matches the sensing element. Where these parts end up depends heavily on the sub-type. Industrial encoders go into motor feedback and robotics. Current sensors show up in power supplies, battery management and motor drives. Gas sensors get designed into air quality monitors, medical equipment and safety systems. Humidity sensors are everywhere from consumer thermostats to pharmaceutical cleanrooms. Color sensors handle sorting and inspection lines. When buyers source sensors, the checklist is longer than people expect. Tolerance and accuracy class matter more than the headline spec. Operating temperature range can kill a design if you assume commercial grade works in an outdoor enclosure. Package type and connector style determine whether you can hand-solder prototypes or need a reflow profile. Output type matters too: analog voltage, current loop, I2C, SPI, or a simple switch closure. The trade-off nobody talks about openly is that the cheapest sensor often has the longest lead time, and the distributor stock that ships tomorrow costs 15 to 20 percent more. Counterfeit risk is real with popular parts like certain Bosch humidity sensors or Allegro current sensors, so traceability and date codes are worth asking about. If you know the part number you need, the fastest way to check stock and get a firm quote is to search it on icxing.com or send the BOM over for a consolidated offer.

Frequently Asked Questions

How do I know if a sensor is genuine when buying from an independent distributor?

Ask for traceability documents: original manufacturer C of C, date codes, lot codes and packaging photos. Reputable independents will provide this without hesitation. Be suspicious of prices significantly below franchise distributor levels on high-demand parts like certain MEMS pressure or current sensors.

What is the real difference between industrial grade and commercial grade sensors?

Industrial grade usually means extended temperature range, better long-term stability, and sometimes enhanced vibration or chemical resistance. The datasheet will show tighter drift specs over time. For a product that sits in a climate-controlled cabinet, commercial grade is often fine. For anything outdoors, under-hood, or in a process plant, industrial is worth the premium.

Why is lead time so long on some sensors and can I get around it?

Many sensors are built to order or have long calibration cycles, especially precision pressure, flow and gas types. Lead times of 12 to 20 weeks are common. Your options are to find distributor stock, accept a compatible alternative from a different manufacturer, or design in a second source from the start.

Image Part Manufacturer Description Stock Action
PT-100 Atlas Scientific
100MM TEMPERATURE...
2,040
In-stock
Inquiry
FLOW-110 Atlas Scientific
SOLENOID
2,890
In-stock
Inquiry
COM-203F Atlas Scientific
PRE-FILTER 3/4INCH
7,320
In-stock
Inquiry
COM-204F Atlas Scientific
PRE-FILTER 3/8INCH
5,960
In-stock
Inquiry
COM-201F Atlas Scientific
PRE-FILTER 1/2INCH
6,820
In-stock
Inquiry
PRB-P-FIT Atlas Scientific
MAGNETIC PROBE H...
1,250
In-stock
Inquiry
DO-MEM-R Atlas Scientific
DISSOLVE OXYLAB ...
5,810
In-stock
Inquiry
PT-50 Atlas Scientific
50MM TEMPERATURE ...
3,270
In-stock
Inquiry
PT-30 Atlas Scientific
30MM TEMPERATURE ...
4,930
In-stock
Inquiry
COM-202F Atlas Scientific
PRE-FILTER 1/4INCH
6,860
In-stock
Inquiry
EZO-RGB Atlas Scientific
EZO-RGB EMBEDDED...
2,410
In-stock
Inquiry
HB-FS Atlas Scientific
HINGED BLACK FLO...
1,760
In-stock
Inquiry
HM-FS Atlas Scientific
HINGED METAL FLO...
1,280
In-stock
Inquiry
TVM-FS Atlas Scientific
TALL VERTICAL ME...
7,150
In-stock
Inquiry
SV-FS Atlas Scientific
SHORT VERTICAL F...
2,900
In-stock
Inquiry
9D-FS Atlas Scientific
90 DEGREE FLOAT SW...
6,050
In-stock
Inquiry
SVM-FS Atlas Scientific
SHORT VERTICAL M...
6,560
In-stock
Inquiry
SEN-204F Atlas Scientific
FLOW METER 1/2INCH
3,700
In-stock
Inquiry
SEN-205F Atlas Scientific
FLOW METER 3/4INCH
4,720
In-stock
Inquiry
SEN-206F Atlas Scientific
FLOW METER 3/8INCH
2,640
In-stock
Inquiry