Optical Sensors - Photodiodes
Optical Sensors Photodiodes cover semiconductor devices that turn light into current, usually across visible, near infrared, or UV bands depending on the die and window material. Buyers usually land here looking for PIN photodiodes for general detection, avalanche photodiodes for low light or higher gain work, quadrant and position sensing diodes, filtered parts for ambient light sensing, and SMD chips for compact consumer or industrial designs. Through hole metal can and ceramic packages still show up in instrumentation, while 0603 or clear epoxy SMD types dominate high volume boards. In use, these parts sit inside smoke detectors, pulse oximeters, optical encoders, barcode readers, fiber optic receivers, exposure control, flame detection, and factory automation sensors. The electrical headline is not just sensitivity. Engineers compare responsivity at a wavelength, dark current, reverse voltage, capacitance, rise time, active area, noise equivalent power, operating temperature, and whether the part needs a transimpedance amplifier layout that is already tight on board space. A practical sourcing note: two photodiodes with the same headline part number can behave differently if one is a genuine batch with tight dark current screening and the other is a reclaimed or relabeled lot. Cheap stock is tempting when a line is down, but a few cents saved can turn into field failures in medical or safety adjacent products. Procurement teams also weigh package preference, since a design qualified on a side looker SMD rarely drops into a top looker footprint without optical revalidation. Lead time matters too; common PIN types are often easy, while APDs and filtered variants can stretch. Check current stock and request a quote at icxing.com, then match date codes and packaging before releasing the order.
Frequently Asked Questions
How do I know if a photodiode lot is genuine or refurbished?
Ask for traceable date codes, original reels or sealed factory packaging, and photos of labels before payment. If the price is far below market and the seller cannot show chain of custody, treat dark current and responsivity as suspect until tested.
What specs matter most when comparing PIN and avalanche photodiodes?
For PIN parts, check responsivity at your wavelength, dark current, capacitance, and reverse voltage. For APDs, add gain, breakdown voltage, excess noise, temperature drift, and bias control needs, because supply design and screening cost rise quickly.
Can I substitute a different package if the electrical specs look close?
Sometimes, but not blindly in optical paths. Active area, lens height, viewing angle, window material, and solder profile can shift coupling and response enough to require revalidation, especially in encoders, medical sensors, and calibrated instruments.
- Active Area：
-
- Diode Type：
-
- Mounting Type：
-
- Operating Temperature：
-
- Package / Case：
-
- Product Status：
-
- Responsivity @ nm：
-
- Spectral Range：
-
- Wavelength：
-
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
|
Intersil (Renesas Electronics Corporation) | SENSOR PHOTODIOD... |
5,140
In-stock
|
Inquiry | ||
|
Intersil (Renesas Electronics Corporation) | SENSOR PHOTODIOD... |
6,170
In-stock
|
Inquiry |