Temperature Sensors - Analog and Digital Output - Industrial
This category covers industrial-grade temperature sensors that output either an analog signal or a digital reading, ready to feed straight into a controller, PLC, or microcontroller. On the analog side you will find voltage-output and current-output parts, along with 4-20mA transmitters built for noisy factory environments. The digital side includes sensors communicating over I2C, SPI, 1-Wire, and PWM, plus integrated parts with onboard ADCs and calibration registers. There are also threshold and thermostat-style devices that flip an output when a setpoint is crossed, which show up a lot in protection circuits. These parts end up in HVAC equipment, motor drives, power supplies, battery packs, food processing lines, and process control cabinets. Accuracy and drift matter more than headline range in most of these applications. A sensor rated plus or minus 0.5 degrees C at 25 degrees can look great on the front page of a datasheet, but the number that actually counts is the tolerance across your full operating range, and that is where cheap parts quietly fall apart. When sourcing, buyers here usually check four things first: package and mounting style, output type matching the existing design, accuracy grade, and whether the part is active or heading toward end of life. Package is a bigger deal than people expect. A TO-92 or surface-mount IC swap is trivial, but threaded probes and transmitters are mechanical decisions that lock in for years. There is also a real trade-off between price and traceability on industrial sensors. Counterfeit and remarked parts circulate in this category, especially for popular legacy part numbers that the original maker has discontinued, so a suspiciously low quote on an obsolete part deserves a second look. Lead time is the other friction point; factory-direct lines for some industrial sensor families run 12 weeks or more, which is why many buyers use independent distribution for gap coverage. If you have a part number and target quantity, check current stock and request a quote at icxing.com.
Frequently Asked Questions
How do I choose between analog and digital output for an industrial temperature sensor?
Match the output to what your controller already accepts. Analog parts like voltage-output ICs or 4-20mA transmitters are simple and noise-tolerant over long cable runs, while digital sensors over I2C or SPI give you factory-calibrated readings with no external ADC. If the design is already built, the output interface usually decides for you.
The part number I need is discontinued. How do I avoid counterfeits when buying from the open market?
Ask for traceability documents, date codes, and photos of actual stock before committing, and be skeptical of pricing far below market on obsolete parts. Reputable independent distributors will support third-party testing or X-ray inspection on request. If a seller refuses lot information, walk away.
What accuracy tolerance should I expect from industrial temperature sensor ICs?
Common industrial IC sensors range from plus or minus 0.5 degrees C down to plus or minus 0.1 degrees C at room temperature, with wider error across the full range. Check the datasheet tolerance at your actual operating temperature, not just the 25 degrees C headline figure. Tighter grades cost noticeably more, so spec what the application genuinely needs.
- Mounting Type:
-
- Output Type:
-
- Resolution:
-
- Sensor Type:
-
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
|
Novus Automation | HART TEMPERATURE... |
7,600
In-stock
|
Inquiry | ||
|
Novus Automation | HART TEMPERATURE... |
2,080
In-stock
|
Inquiry | ||
|
Novus Automation | DIN RAIL TEMPERA... |
7,620
In-stock
|
Inquiry | ||
|
Novus Automation | HEAD TEMPERATURE... |
2,840
In-stock
|
Inquiry |
