Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Magnets - Sensor Matched

Magnets sensor matched sets are exactly what they sound like: a magnet paired with a magnetic sensor, usually a Hall effect switch, reed sensor or similar device, where the two parts are specified to work together. The magnet strength, polarity orientation and the sensor's operate and release points are characterized as a pair, so the engineer does not have to guess at the air gap and trigger distance. Typical sub-types include cylindrical or rectangular magnets matched with latching Hall switches, ring magnets paired with rotary position sensors, and small axial or diametric magnets bundled with reed-based proximity sensors. These pairs show up in flow meters, door and lid detection, speed sensing on motors and gearboxes, and position feedback in industrial actuators. When sourcing these parts, buyers usually check the magnet material first, since a ferrite magnet behaves very differently from a neodymium one at the same size, and that changes the usable sensing distance. They also look at the sensor's operating point tolerance, because a sloppy tolerance window forces you to tighten the mechanical design or accept inconsistent triggering across a production run. One real trade-off here is that a matched pair from the original manufacturer costs more than buying a generic magnet and sensor separately, but the pair saves you the characterization work and reduces the risk of field failures from mismatched parts. Counterfeit risk is lower for the magnet itself than for the sensor, so most of the verification effort goes on the sensor die and markings. Packaging matters too, since loose magnets in bulk bags can arrive partially demagnetized or chipped, while tape-and-reel or tray packaging protects both parts in transit. If you are qualifying a matched magnet and sensor set for a build, you can check current stock and request a quote directly at icxing.com.

Frequently Asked Questions

How do I know the magnet and sensor are actually matched and not just sold together?

A genuine matched pair comes with a specified operate distance or a pairing document showing the magnet's field strength against the sensor's operate and release points. Ask the supplier for the pairing datasheet or at least a guaranteed minimum and maximum actuation distance at a stated temperature. If they can only give you the sensor datasheet and a generic magnet spec, the parts are bundled, not matched.

What tolerance should I expect on the sensing distance with these matched sets?

Most matched pairs hold the operate distance within about ±10 to 15 percent of the nominal value across the rated temperature range. The spread comes mostly from the sensor's threshold variation and, to a lesser degree, magnet strength drift. If your design is sensitive to trigger position, check the tolerance at your worst-case temperature, not just at 25°C.

Can I substitute a third-party magnet with the original sensor if the matched set is out of stock?

You can, but only if you match the magnet material, grade, geometry and magnetization direction to the original part. A neodymium magnet that is slightly smaller or a grade lower can shift the operate distance enough to cause missed triggers at temperature extremes. When lead time forces a substitution, re-verify the actuation distance on a sample build before committing to production.

12 Records
Image Part Manufacturer Description Stock Action
PW520000 Celduc
MAGNET FOR PW
7,870
In-stock
Inquiry
P6250000 Celduc
MAGNET DIA. 6 LENG...
7,360
In-stock
Inquiry
PT810000 Celduc
MAGNET M12 PLASTI...
6,630
In-stock
Inquiry
P2000100 Celduc
MAGNET FOR PXS
3,000
In-stock
Inquiry
P3000100 Celduc
MAGNET FOR PSS
1,120
In-stock
Inquiry
PA320000 Celduc
MAGNET DIA. 3 LENG...
7,220
In-stock
Inquiry
P3150000 Celduc
MAGNET DIA. 3 LENG...
3,470
In-stock
Inquiry
P4200000 Celduc
MAGNET DIA. 4 LENG...
6,260
In-stock
Inquiry
P4160000 Celduc
MAGNET DIA. 5 LENG...
5,900
In-stock
Inquiry
PT505000 Celduc
MAGNET M8 PLASTIQ...
1,910
In-stock
Inquiry
P0540000 Celduc
MAGNET FOR PSC4200...
2,710
In-stock
Inquiry
P4159000 Celduc
MAGNET DIA. 3 LENG...
6,350
In-stock
Inquiry