Welcome to XingHuan International Trade Limited Authorized Resource Competitive Price  Cost Down For Supply Chain Solution

Connectors, Interconnects

Connectors Interconnects covers the parts that join one circuit to another, from the AC inlet on a power supply chassis down to the tiny FFC connector holding a display ribbon in a handheld device. The category is broad. It includes AC power connectors, backplane and card edge types, banana and tip jacks for test benches, barrel power jacks, coaxial RF connectors, D-sub shells, circular connectors for industrial and mil-spec gear, fiber optic termini, board-to-board mezzanine parts, and between-series adapters for mating dissimilar interfaces. Nearly every assembled product contains several of these, and they show up in telecom racks, medical equipment, automotive harnesses, instrumentation, and consumer electronics alike. Buyers sourcing connectors tend to check a few things before anything else: mating cycle rating, contact plating (gold flash versus 30 microinch gold changes both price and life), current and voltage ratings per contact, wire gauge range, and the exact keying or polarization code, since one wrong suffix can mean a housing that looks right but will not mate. Pitch and footprint matter for board-level parts, and RF types add impedance and frequency range to the checklist. The real trade-off in this category is usually lead time against price. Franchised stock on popular TE, Molex, or Amphenol series can carry 12 to 20 week factory lead times when demand spikes, so many buyers turn to independent channels for shortages. That is where counterfeit risk creeps in, especially on high-value circular and mil-spec connectors, and it is worth asking for traceability and photos of labels and date codes before committing. Packaging preference matters too: cut tape versus full reel, or bagged versus tray, affects both price and how the parts run through your assembly process. You can check current stock and get a quote on any part number in this category at icxing.com.

Frequently Asked Questions

How do I make sure the connectors I buy from an independent distributor are not counterfeit?

Ask for full traceability paperwork, lot and date codes, and clear photos of the actual parts and labels before payment. Reputable independent distributors will also support third-party testing such as XRF plating analysis and decapsulation on higher-value parts. If a price is far below market on a shortage part, treat that as a warning sign.

The part number I need shows a long factory lead time. What are my options?

First check whether a different suffix of the same series (plating, keying, or packaging variant) is in stock, since those are often interchangeable for your build. Independent distributors frequently hold franchised excess or factory overruns on constrained series, so sending your full BOM for a shortage quote is usually faster than waiting on the standard lead time.

Does gold plating thickness actually matter when I select a connector?

Yes. Gold flash is fine for a few dozen mating cycles in a controlled environment, but connectors rated for hundreds of cycles typically specify 15 to 30 microinches of gold over nickel. Thinner plating saves cost but wears through to the base metal, which raises contact resistance and causes intermittent failures over time, especially in humid or high-vibration environments.

Image Part Manufacturer Description Stock Action
640635-3 TE Connectivity AMP Connectors
CONN 26AWG IDC TIN
1,840
In-stock
Inquiry
969089-1 TE Connectivity AMP Connectors
CONN PIN CRIMP TI...
3,900
In-stock
Inquiry
2-86147-2 TE Connectivity AMP Connectors
CONN PIN SOLDER P...
5,980
In-stock
Inquiry
1981341-1 TE Connectivity AMP Connectors
CONN SOCKET CRIM...
3,230
In-stock
Inquiry
1981341-2 TE Connectivity AMP Connectors
CONN SOCKET CRIM...
4,180
In-stock
Inquiry
1326029-6 TE Connectivity AMP Connectors
2.8MM BLD,UNSEAL,18...
2,670
In-stock
Inquiry
927772-3 TE Connectivity AMP Connectors
CONN SOCKET 20-24AW...
2,650
In-stock
Inquiry
102316-6 TE Connectivity AMP Connectors
CONN SOCKET 27-32AW...
5,130
In-stock
Inquiry
965899-1 TE Connectivity AMP Connectors
CONN SOCKET 13-15AW...
6,380
In-stock
Inquiry
1-1438299-0 TE Connectivity AMP Connectors
CONN PIN 22-24AWG C...
4,230
In-stock
Inquiry
1241872-1 TE Connectivity AMP Connectors
CONN SOCKET 13-17AW...
5,530
In-stock
Inquiry
928820-2 TE Connectivity AMP Connectors
CONN SOCKET 17-20AW...
6,970
In-stock
Inquiry
1743162-1 TE Connectivity AMP Connectors
CONN SOCKET 13-17AW...
1,480
In-stock
Inquiry
969129-3 TE Connectivity AMP Connectors
CONN SOCKET 28-32AW...
3,550
In-stock
Inquiry
2-964295-1 TE Connectivity AMP Connectors
TAB 2,8X0,8
5,340
In-stock
Inquiry
171699-1 TE Connectivity AMP Connectors
CONN SOCKET 20-24AW...
1,040
In-stock
Inquiry
5-968221-6 TE Connectivity AMP Connectors
MQS SOCKET CONTA...
2,180
In-stock
Inquiry
5-2316113-5 TE Connectivity AMP Connectors
2MM,REC,CNT,CRIMP...
5,510
In-stock
Inquiry
175284-5 TE Connectivity AMP Connectors
CONN TAB 24-28AWG C...
6,110
In-stock
Inquiry
1241868-1 TE Connectivity AMP Connectors
CONN SOCKET 17-20AW...
6,040
In-stock
Inquiry